產地	河北定州
品牌	海韻牌
型號	BT-6004

海韻牌BT-6004特快型超高強微膨脹灌漿料Chaton brand BT-6004 express type super-high strength micro expansion grouting material檢驗標準：YB/T9261-98灌漿材料行業標準inspection standards: YB/T9261-98 grouting material industry standard 產品介紹Product introduction　　海韻牌BT-6004特快型超高強微膨脹灌漿料，是在海韻牌BT-6003型基礎上進一步改進的新產品。與海韻牌BT-6003型快硬高強微膨脹灌漿料相比具有半天強度更高的特點，主要用于快速搶修或更換設備的基礎灌漿。灌漿成型后，12小時可試開機生產。創造極大的經濟效益。　　Chaton brand BT-6004 express type super-high strength micro expansion grouting material, is in chaton brand BT - 6003 type basis of further improvement of new products. With chaton brand BT-6003 type fast GaoJiangWei expansion grouting material hard compared with half the characteristics of higher intensity, mainly for the fast repair or replacement equipment based grouting. Grouting forming, 12 hours can try boot production. Create great economic benefits. 技術特點Technical characteristics 旱強、高強 海韻牌BT-6004特快型超高強微膨脹灌漿料**強度可達50MPa以上，設備安裝完畢后12小時可運行生產。　　Drought strong, high-strength chaton brand BT-6004 express type super-high strength micro expansion grouting material day intensity can reach 50MPa above, equipment installation ends after 12 hours can run production.自流態 現場只需加水攪拌后，即可進行施工，不需振搗便可充填全部間隙。　　Their only after water mixing modal on-site construction, and then, do not need to vibration can be filling all clearance.　　微膨脹 以保證灌漿料與基礎緊密接觸。　　Micro expansion to ensure grouting materials and basic close contact.耐久性 200萬次疲勞實驗，50次凍融循環試驗，強度無明顯變化。　　Durability 200 million times fatigue experiments, 50 times freeze-thaw cycles test, intensity is no change.抗油滲 在機油中浸泡30天后其強度比浸油前提高10%以上。　　Of oil and permeability in oil soak 30 days before its strength than immersed increase by 10%. 施工技術與方法The construction technology and method　　BT-6004灌漿料的施工不僅應符合本施工技術方法的規定，尚應符合現行《混凝土結構工程施工及驗收規范》（GB50204）、《混凝土結構設計規范》（GBJ10）、《混凝土結構加固技術規范》（CECS25）及《水泥基灌漿材料施工技術規程》（YB/T9261-98）中的有關規定。　　BT-6004 grouting material construction should not only conforms to the construction technology and methods, there should be in line with the provisions of the existing concrete structure engineering construction and acceptance of rules "(GB50204), the design specification for concrete structures" (GBJ10), the concrete inforcement technical specification (CECS25) and the cement base grouting material construction technical regulation (YB/T9261-98) the relevant provisions. 附錄B 錨固地腳螺栓施工工藝The appendix B anchor bolts construction craft 清除螺栓表面油污及鐵銹↓清理孔→清除孔內積水→調整及固定插入螺栓→澆注→養護→安裝設備↑配制灌漿料 　　灌漿方式分為：自重法灌漿、高位漏斗法灌漿、壓力法灌漿、軌道基礎灌漿　　Grouting way is divided into: weight method grouting and high pressure grouting and funnel method, rail base grouting method grouting